[ITEM]
21.04.2020

Mitsubishi Mf355f 592ma Manual Inject Floppy

55

This Web page last updated dated April 16 2018

This page is about floppy diskettes. There is a lot of information about floppy drives and S-100 on this page, including Web links. (There was also 'classic' hard drive information here: that info is now on another Web page.)To contact me, or for ordering information follow this link.To return to my S-100 list click here.

On This Web page:

The Mitsubishi M-Series - 18,000 BTU - Mini Split Indoor Unit - Floor Mount - Heat Pump MFZ-KA18NA has been discontinued. Check out Expert's recommended alternatives for another top mini split system. P/N 4730-0013-04. Field Service Manual Service Manual 4730-0013-04 Rev A consists of: 4720-0013-04 Rev A (2/96) August, 1999 A detailed Table of Contents and List of Effective Pages are contained in.

My other Web pages on floppy drives:
  • How to read and write 'old' floppy diskettes (was on this page until 2011)
  • My S-100 Frequently Asked Questions (FAQ's). There are several questions about floppy drives and their use.
Hard drive information that used to be here

Floppy diskettes for sale

  • 8-inch disks for sale
  • 5.25 inch, for sale
  • 3.5 inch for sale
  • Diskette cases for sale

Conditions and categories of diskettes

For all disks, pease specify SINGLE or DOUBLE SIDED (important) and SINGLE or DOUBLE DENSITY (less critical, I'll explain). If in doubt, describe or send an image of the label side of one of your diskettes. Used diskette sets will be matched by brand as stocks allow. Brands include IBM, 3M, Verbatum, Dysan and others. We have some 'no brand' unlabled disks also.

Write protected diskettes:8-inch diskettes may have a 'write protect notch' on thefront edge of the envelope. Here's a photo of that notch. If that notchis exposed as shown in the photo - your diskette cannot be written or formatted. You must put a smalllable or dark tape over it. Small reflective labels are shown in the photo. Meanwhile, 5.25' diskettes have a notch on the SIDE, and it must be OPEN to permit write, and you must COVER it to 'write protect' the diskette. A customer returned some 8-inch disks because he did not know about 'write protect'.

Used stock comes in various descriptions and is as described, it's not junk: 'used a few times' means these were backup disks only used once or twice.

If you order a few 8-inch diskettes as above, you can add ONE punched or unpunched punch card for one dollar within the USA. By itself, 1st class USA mail - $3. If you want more, explain.

I'll provide a piece of PUNCHED PAPER TAPE for $1 if disks or punched cards are ordered. Otherwise, $3, first class USA mail.

I need your FULL SHIPPING ADDRESS for your order, payment by check or money order or 'cash' - US paper currency. Follow this ordering link for more ordering info and my email address. Orders outside the USA will cost more, I'll provide a quoted cost.

8-inch diskettes

If you want ONE or TWO 8-inch diskettes, follow this link.

multiple 8-inch diskettes for display only.

I'll consider quoting multiple diskettes for display only not use. These will be diskettes with some damage to the media but otherwise they visually appear in fair to good condition. If you have specific requests about type, condition, look, etc. etc - it will raise the price. BE SPECIFIC. Otherwise you can buy multiple disks as described below. Shipping weight per box, 1.5 lb + 1.0 lbs per ten

8-inch diskettes, unused old stock , brand name, in boxes of ten: sealed boxes are opened and inspected, see the notes above.

Implements class changes to balance combat. (Reverted the 1.25b Fix: “Hex will no longer extend the duration of Metamorphosis.”). Warcraft 3 frozen throne 1.26.0.6401. Fixed numerous minor bugs. In WC3 Patch 1.26a the hex has been fixed: It does not longer provide speed boost to heroes, if it is casted a the end of metamorphosis or chemical rage effects. 😉 Warcraft 3 Patch 1.26a Changelog:1.26a Game Fixes:.

  • unused 8' single sided single density (SSSD) OUT as of Sept 2012, but ask
  • unused 8' single sided double density (SSDD) Use SSSD disks, no difference!OUt as of Sept 2012, but ask
  • unused 8' double sided double density (DSDD), brand names, largely Dysan. $45 per box of ten + ship.
  • unused 8' hard sectored (32 sector): we have a few boxes left! MITS Altair ICOM Wang used these. $59 per box of ten + ship.
  • Disks of specific form or condition may cost more - be specific when ordering.

8-inch diskettes lightly used
NOTE: for used disks below, we'll try to provide them all of one brandper set of ten. Give us a few choices of brand if you have a preference.

  • 8' DSDD, lightly used once to a few times, with sleeves: $25 per ten + ship.
  • 8' SSSD, lightly used once to a few times. with sleeves: $25 per ten + ship.
  • 8' SSDD, lightly used once to a few times. Use SSSD, no difference!
  • Disks of specific form or condition may cost more - be specific when ordering.

lables for 8' disks, $1 per ten

5.25 inch diskettes:

Note: review the general information above before ordering. If you want ONE OR TWO 8-inch or 5.25-inch floppy diskettes, follow this link.

5.25' soft sectored: not for sale by me, but they are hard to find in 2010.
5.25' hard sectored:
-- 16 sectors double sided double density (DSDD), new old stock: contact me
-- 10 sectors: I have no sources but contact me anyway.
-- if you have HARD SECTORED disks to sell, let me know.

3.5 inch diskettes:

3.5' 800K (720K) 3.5' double sided DOUBLE density (not high density). Great for older Mac/Apple equipment, some old computers andPC's. Can also use as 400K (360k) (single sided) diskettes.

Unused old stock, sealed - not available as of 2011 from me.

1.4M 3.5' diskettes - widely available elsewhere.

Diskette cases

CP/M and S-100 floppy disk controllers

If you 'want CP/M to run on my S-100 system', pleaseread my Frequent Questions page and my 'how to run CP/M' Pagefor answers to thatquestion. If you want docs for YOUR S-100 controller, check my lists of card manufacturers tosee if I have the manual for your card. I have a few floppy controllercards for sale but in general I'd rather you ask for a SPECIFIC manufacturerand brand of card rather than 'just any'. However I do have one brandand model available for general interests. Check mySD Systems Versafloppy II page for the status of S-100 Versafloppy IIcontroller cards and software in my stock.

I have docs, with source code, for many S-100 floppy disk controllers. If you are debugging or repairing a floppy disk controller that is NOT S-100, you may find one ofthese manuals useful. they are listed by manufacturer and model; start from myS-100 home page to search the lists of manuals. Also, check my list of S-100 Web pointersfor sites which also have docs for controllers, or FDC chips such as the Western DigitalWD1771, 1773, 1793, and so on. The same considerations apply to older hard disk controllers of course.

Buying floppy drives

Ordering floppy drives

Floppy drive power requirements


Various 8-inch floppyd drive cabinets are available, ask for details. Shippingextra, weight and size is considerable, espeically with power supplies. These are almost always non-switching supplies. Size about 19 inches wide, several inches high,various depths. With the power supply in the back, these can be 24 inches deep. Mostare intended for 'full height' drives.

For purchase, please note your location by city/state/zipwhen inquiring for shipping estimates. Not shipped outside the USA - are you kidding? If you are interested in empty cabinets, PLEASE note what kind of power connector your drives have: there are several varieties. Supply limited, cables also limited.Prices subject to change.

Here's a stack of some 8-inch cabinets
a single 8-inch cabinet
another 8-inch cabinet

A rather sleek drive cabinet was theHeath/Zenith Z-207-41 tabletop 8' drive cabinet. Autocad notes 2015 in hindi pdf. A tan cabinet on rubber feet, with power supply and fan, power switch on front. I have a few of these left, I use them regularly, so I'm not likely to sell one - it's a good example. Shipping weight is 40 lbs for cabinet and power supply, with two drives it typically weighs 55 lbs. A 30-page manual is available, ask for a price for a copy.


floppy and hard Drive Documentation

All documentation photocopied at a per-page fee plus postage and handling. I will quotea price when you order, check my ordering information .Ask for manuals for your specific drive, by manufacturer and model number. Ifyou have a manual I don't, I'd be interested in a trade or purchase ofcopies. If you need a manual for a drive not listed below, contact me soI can get look for it!

Often I get requests for 'just the jumper information'. It turns out the jumper info typically is several pages depending on the manual, not just one. And you may or may not need more info from the manual, either to set the jumpers or to maintain or repair the drive, or in some cases the pinouts of the drive connector. But, assuming the jumper info is six pages or less, I'll charge $2 to pull the manual and copy those pages, plus postage and handling to send those pages in a business letter type envelope at several ounces weight by air mail. (Remind me of this policy if you choose it.)

8-inch floppy drive manuals

Optotronics technology, DCU - disk control unit (AC drive motor control), 12 pgsCalcomp 140 OEM Reference manual, 40 pgs, no schematics or parts
Calcomp 142M Tech manual, 60 pgs, parts, schematic and rework notes
California Computer Products, CalDisk 142M Tech manual, 60 pgs, parts, schematic and rework notes
California Computer Products, CalDisk 143M (2-sided) Tech manual, 50 pgs, parts, no schematics
{Calcomp bought CalDisk so manuals may be identical. The 142 use different
read data decoder boards for FM or MFM format - if you use that option.
Control Data spec sheets, 9406-4 4 pgs, color photos
Control Data brochure, 9406 9404 and 9408 9409. 4 pgs color
Control Data (CDC) (MPI) BR803, BR8A3, BR8A2, BR8A5, BR8A6 models, 76 pgs. Includes adaption to Shugart-like signals.
Dysan 360/2A 8-inch alignment disk instructions, 1978, 8 pages
Dysan Maxi 48 TPI Diagnositc diskette manual, for 808-100, 808-200, 808-300, 808-400; 4 pgs
iCOM - see this Web page
IMI 5007 disk drive, Cromemco HD5 manual #023-6028, January 1982, 104pp.
Innovex 200M Floppy Disk Drive Maintenance manual, Oct 1975. 68 pgs
Magnetic Peripherals Inc (CDC) (MPI) BR803, BR8A3, BR8A2, BR8A5 models, 76 pgs. Includes adaption to Shugart-like signals. 76 pgs
Mitsubishi M2894-63 Standard Specifications, 46 pgs
Mitsubishi M2896-63 manual by Mitsubishi, standard specifications 68 pgs, schematics
..this version has all small IC's oriented PARALLEL to 50-pin edge connector
Mitsubishi M2896-63 manual sold by Heath/Zenith, 60 pages, schematics
..this version has IC's between power and head connectors PERPENDICULAR to 50-pin edge connector
Matsushita JA-751A specification, 36 pgs
NEC FD1165 maintenance manual, copy, 100 pgs
NEC FD-1165 Product Description manual, copy, 44 pgs
PerSci drives: Cromemco
PerSci 299B disk drive technical manual, Cromemco #023-6000, April 1981, 50 pp.
PerSci 277 disk drive allignment procedure, Cromemco #023-6008, March 1980, 15 pp.
PerSci model 277 diskette drive product spec, Cromemco #023-0057, 25 pp.
PerSci 277 disk drive instruction manual (parts list and schematics), Cromemco #023-0016, May 1980, 50 pp.
PerSci drives: IMSAI
Persci model 70, 270, 277, 1070 documents - See my IMSAI Web page
-- model 277 dual Spec sheet, 2 pages, 2-color 1977
-- model 70 Spec sheet, 2 pages, 2-color 1977
-- model 270 dual Spec sheet, 2 pages, 2-color 1977
-- 1070 Intelligent Diskettte Drive Controller (summary), 8 pages text
Pertec FD400 FD410 FD500 FD510 etc.:
..see my MITS/Altair Web page for other Pertec docs
Qume DataTrak 8 (full height) (DT8) Product Specifications, Apr 1979, 13 pgs
Qume DataTrak 8 maintenance manual, Jan 1980, half sized, 80 pgs
Qume DataTrak 8 maintenance manual, Jan 1980, full sized, first 40 pages plus HALF of last 40 pgs
QumeTrak 842 drive - same as Qume DataTrak 8 or DT8 as above
QumeTrak 842 maintenance manual, Dec 1981, 96 pgs (from copy)
Qume 242 (half height) product manual, 27 pages (from copy)
Qume 242 maintenance manual, schematics 92 pgs (from copy)
Remex tech manual, RFD4000-A, RFD4001-A RFD2000-A, RFD2001-A, 1979. over 125 pages
Siemens (Singer, World Disk Drives) FDD100-8 manual, 90 pgs
Siemens (Singer, World Disk Drives) FDD200-8 manuals:
-- Volume 2 Tech Manual, parts and procedures. 36 pages
-- Volume 1 Tech manual, operation, theory, installation, 94 pages
-- no schematics, different from FDD-220 circuit board
Shugart SA800, SA801 manuals below from 1977: 25100-25017 models (small IC chips)
Shugart SA800 Double Density Design Guide - App. Bulletin, 1977. 33 pgs.
Shugart SA800 SA801 OEM manual, 42 pgs (jumper and use information)
Shugart SA800 SA801 maintenance manual, 30 pgs (schematics, testing advice)
Shugart SA800 SA801 illustrated parts catalog, 16 pgs (parts diagrams& lists)
Shugart SA800 SA801 Theory of Operation,31 pgs (parts diagrams& lists)
Shugart Spare parts price list, see below
Shugart SA800, SA801 manuals below for PC board #25136 (all small IC chips) and 25229 (w/ large LSI chip)
--- also numbers 2510X, 2517X, 25229

Shugart SA800 SA801 Service manual, 1981.Theory, maintenance, 100 pgs
Shugart Spare parts price list, see below
Other Shugart manuals:
Shugart SA850, SA851 service and maint. manual, copy, 100 pgs
Shugart application note, 'replacing an SA850/851 with an 860', 8 pgs
Shugart Spare parts price list, 1980 and 1981. For SA 800, 801, 810, 850, 860? drives. 30 pgs.
Shugart SA810, SA860 OEM manual, 54 pgs
Shugart SA810, SA860 OEM and service manual, 112 pgs
Shugart SA809 drive exercisor manual, from copy, 8 pgsMitsubishi Mf355f 592ma Manual Inject Floppy
Shugart SA900, 901, 902 maintenance manual. schematics. 74 pgs
Shugart SA900, SA901 OEM manual, 38 pgs
Synetic FDS-2 - see this Web page
Tandon TM848-1, TM848-2 Product Specification, 16 pgs
Tandon TM848(-1,-2) 8' drive technical manual, Rev B, C, D, Dec 1982, circuit board 210060 or 210094, 96 pp.
- above same as Cromemco #023-6040 service manual
Tandon TM848-1E, -2E OEM, oper., service manual, 1983, circuit board 210742-000 or 210772 or 210771, 93 pgs
Wangco 82 floppy drive oper. & maint.manaual, Cromemco #023-0058, 1981, 50 pp.
Y-E Data YD-174 Two-Sided Diskette Drive, schematics, 10 pgs
Y-E Data YD-180 8-inch drive manual, from copy, 30 pgs

5.25 inch floppy drive manuals

Canon photos of MDD200, MDD400 series, 2 pgs each
Canon MDD-210, -220 tech guide, 40 pgs
Canon MDD-210, -220 product brief, 16 pgs
Control Data spec sheets, 9415 2 pgs, 9415-80 2 pgs, 9406-5 4 pgs,
Control Data brochure, 9406 9404 and 9408 9409. 4 pgs color
Control Data (CDC, MPI) 9429 Hardware Maintenance manual, 64 pgs
Control Data (CDC, MPI) product specification for 9429, 77715860, 46 pgs
Control Data (CDC, MPI), Application note, 'PLO and Write Precompensation for 5.25 inch FDD's', 77653447, 40 pgs
Control Data, Application note, '5.25 inch FDD Format considerations and controller compatibilities', 7589469, 45 pgs
Dysan 282 alignment disk instructions, 6 pgs
Dysan Mini 48 TPI Diagnositc diskette manual, for 508-100, 508-200, 508-300, 508-400; 4 pgs
Dysan Mini 96 TPI Diagnositc diskette manual, for 506-100, 506-200, 506-300, 506-400; 4 pgs
Epson SD0540 series specification, schematics, 34 pgs (copy)
Magnetic Peripherals Inc (CDC) 9429 Hardware Maint. Manual, 64 pgs
Magnetic Peripherals Inc (CDC) product specification for 9429, 77715860, 46 pgs
MPI (Micro Peripherals Inc) Model 51/52 product manual rev 3
MPI (Micro Peripherals Inc) Model 51/52 product manual addendum to above
MPI (Micro Peripherals INc) MOdel 91/92, schematic only
Micropolis 5.25-inch drives: see this documentfor more info and manuals.

Mitsubishi MF501A-3 tech manual, half height drive, 23 pgs
Mitsubishi MF501A-3 maintenance manual, half height drive, 11 pgs
Mitsubishi MF501A-301U illust. parts list, half height drive, 9 pgs
Mitsubishi MF501A-347UA manuals in Tandy 3000 Tech manual
Mitsubishi M4851 OEM manual, half height drive, 65 pgs
Mitsubishi M4851 manuals in Tandy 3000 Tech manual
Mitsubishi M4853 maint. manual, 35 pgs
Mitsubishi M4853 parts list, schematics, 28 pgs
Mitsubishi M4853-1 maint. manual, 18 pgs
Mitsubishi M4853 parts list, schematics, 22 pgs
Mitsubishi M4853 and M4853-1 differences, 8 pgs
Mitsubishi M4854-347 manual, half size (Tandy 3000) as follows:
----jumpers and schematics, UGD-0262A, 9 pgs;
----standard specifications , UGD-0261A, 50 pgs;
----parts list, 14 pgsMitsubishi MF504A-347UA manual, half size (Tandy 3000) as follows:
----jumpers and schematics, & component layout, UGD-0328A, 20 pgs;
----maintenance , UGD-0343A, 10 pgs;
----technical , UGD-0344A, 24 pgs;
----standard specifications , UGD-0312B, 46 pgs
----illustrated parts list, UED-0135A, 10 pgs
Mitsumi D509V2 service manual, 70 pgs (copy), schematic
Newtronics Co. Ltd - see Mitsumi
Pertec FD250 Operating and service manual, 36 pgs
..see my MITS/Altair Web page for other Pertec docs
Qume 142 maintenance manual, May 1983, full sized, 100 pgs
Shugart SA455, SA465 service manual, 69 pgs
Shugart SA410, SA460 manual (copy), 100 pgs
Shugart SA455/465 OEM manual, copy. specs, jumpers, only. 25 pgs
Shugart SA400 OEM manual, 50 pgs
Shugart SA400 Service manual, schematics, 77 pgs
Shugart SA400L Service manual, less schematics, 30 pgs
Shugart SA809 drive exercisor manual, from copy, 8 pgs
Siemens FDD-100-5B OEM, has schematic and maintenance, 76 pgs
Teac FD-54B specifications, 30 pgs
Teac FD-54 maintenance manual, 72 pgs
Teac FD-55GFV-17 specification, 44 pgs half sized (copy)
Teac FD-55GFR specifications, jumper and mechanical info, no schematics. 21 pages (copy)
Tandon (TM100) 5-1/4' floppy drive manual (Vector computers) 104 pgs
--- TM100-3, TM100-4 TM100-3M, TM100-4M w/schematics & parts, troubleshooting, more.
--- (see Vector Graphics manuals for more info
Tandon TM100 Tech, 100 pgs - ????
Tandon TM100-1, TM100-2 Product Spec & Users manual, 26 pgs, no schematics (copy)
Tandon TM101-4, TM102-2 Product Spec & Users manual, 27 pgs, no schematics (copy)
Tandon TM50-1 TM50-2 Operating and Service Manual, 100 pgs (copy)
-- detailed theory, signals, jumpers, maintenance, schematics.
Tandon TM100 Operating and Service Manual, 24 pgs half sized no schematics (copy)
-- alignment, signal, connector and jumper info.
tandon TM100-2 Product Specification, signals & jumpers but no schematics 16 pgs (copy)
tandon Product Specification, TM-100-1, -2, -3, -3M, -4, -4M. no schematics 15 pgs (copy)

3.0 inch and 3.5 inch floppy drive manuals

Canon photos of MD350, MDD200, MDD400 series, 2 pgs each
Canon MD350S specification, 30 pgs
Epson SMD-280 spec sheet, 2 pgs
Matsushita EME-160 & -180, 15 pgs
Mitsubishi MF355B standard specification, 46 pgs
Mitsumi D359T2 service manual, 64 pgs (copy), schematic
Panasonic EME-150M tech spec (3.0'), 14 pgs
Panasonic EME-150 & -250 OEM manual (3.0'), 20 pgs
Panasonic JU-313, 323, 363 OEM manual, 38 pgs
Sony MP-F73W-00D & -01D tech note, 26 pgs
Sony MPF73W00D, -01D product spec, 26 pgs
Sony MP-F73W-50 info (buy with MP-F73W-00 docs no extra charge)
Sony MPF920, MPF820 - various data sheets, 6 pages

Some people ask: 'I want to read 8-inch diskettes on my PC/Windows/Linux machine. Please sell me a complete system, or tell me where to get one.' Often they have no idea how this might be accomplished. Other people want to read CP/M oer other non-MS-DOS 5.25' or 3.5' diskettes, or old Mac 400K or 800K 3.5' Mac diskettes, on a Windows PC. Folks, this is not a 'plug and play' project. A few people want to read really ODD formats - hard sectored, M2FM, and so on. Until Sept 2011 I had information on this subject, on this Web page. How to read and write 'old' floppy diskettes now has it's own Web page, look there for details. Links below to the old discussion, now link to the new Web page. - Herb Johnson

floppy drive controllers with conversion, imaging software - Discussion of various PC based floppy controllers is moved, look there for details.

A reference to Sydex, ANADISK and 22DISK is also moved to the Web page on How to read and write 'old' floppy diskettes

Catweasel floppy controller - The Catweasle discussion is moved look there for details.

Software to support foreign diskettes on Windows-based PC's - is moved to another WEb page, look there for details.

Check my 'how to CP/M' Web page for more discussion of Dave Dunfield's imagedisk software tools, and his collection of system disk images.


Copyright © 2018 Herb Johnson

[/ITEM]
[/MAIN]
21.04.2020

Mitsubishi Mf355f 592ma Manual Inject Floppy

69

This Web page last updated dated April 16 2018

This page is about floppy diskettes. There is a lot of information about floppy drives and S-100 on this page, including Web links. (There was also 'classic' hard drive information here: that info is now on another Web page.)To contact me, or for ordering information follow this link.To return to my S-100 list click here.

On This Web page:

The Mitsubishi M-Series - 18,000 BTU - Mini Split Indoor Unit - Floor Mount - Heat Pump MFZ-KA18NA has been discontinued. Check out Expert's recommended alternatives for another top mini split system. P/N 4730-0013-04. Field Service Manual Service Manual 4730-0013-04 Rev A consists of: 4720-0013-04 Rev A (2/96) August, 1999 A detailed Table of Contents and List of Effective Pages are contained in.

My other Web pages on floppy drives:
  • How to read and write 'old' floppy diskettes (was on this page until 2011)
  • My S-100 Frequently Asked Questions (FAQ's). There are several questions about floppy drives and their use.
Hard drive information that used to be here

Floppy diskettes for sale

  • 8-inch disks for sale
  • 5.25 inch, for sale
  • 3.5 inch for sale
  • Diskette cases for sale

Conditions and categories of diskettes

For all disks, pease specify SINGLE or DOUBLE SIDED (important) and SINGLE or DOUBLE DENSITY (less critical, I'll explain). If in doubt, describe or send an image of the label side of one of your diskettes. Used diskette sets will be matched by brand as stocks allow. Brands include IBM, 3M, Verbatum, Dysan and others. We have some 'no brand' unlabled disks also.

Write protected diskettes:8-inch diskettes may have a 'write protect notch' on thefront edge of the envelope. Here's a photo of that notch. If that notchis exposed as shown in the photo - your diskette cannot be written or formatted. You must put a smalllable or dark tape over it. Small reflective labels are shown in the photo. Meanwhile, 5.25' diskettes have a notch on the SIDE, and it must be OPEN to permit write, and you must COVER it to 'write protect' the diskette. A customer returned some 8-inch disks because he did not know about 'write protect'.

Used stock comes in various descriptions and is as described, it's not junk: 'used a few times' means these were backup disks only used once or twice.

If you order a few 8-inch diskettes as above, you can add ONE punched or unpunched punch card for one dollar within the USA. By itself, 1st class USA mail - $3. If you want more, explain.

I'll provide a piece of PUNCHED PAPER TAPE for $1 if disks or punched cards are ordered. Otherwise, $3, first class USA mail.

I need your FULL SHIPPING ADDRESS for your order, payment by check or money order or 'cash' - US paper currency. Follow this ordering link for more ordering info and my email address. Orders outside the USA will cost more, I'll provide a quoted cost.

8-inch diskettes

If you want ONE or TWO 8-inch diskettes, follow this link.

multiple 8-inch diskettes for display only.

I'll consider quoting multiple diskettes for display only not use. These will be diskettes with some damage to the media but otherwise they visually appear in fair to good condition. If you have specific requests about type, condition, look, etc. etc - it will raise the price. BE SPECIFIC. Otherwise you can buy multiple disks as described below. Shipping weight per box, 1.5 lb + 1.0 lbs per ten

8-inch diskettes, unused old stock , brand name, in boxes of ten: sealed boxes are opened and inspected, see the notes above.

Implements class changes to balance combat. (Reverted the 1.25b Fix: “Hex will no longer extend the duration of Metamorphosis.”). Warcraft 3 frozen throne 1.26.0.6401. Fixed numerous minor bugs. In WC3 Patch 1.26a the hex has been fixed: It does not longer provide speed boost to heroes, if it is casted a the end of metamorphosis or chemical rage effects. 😉 Warcraft 3 Patch 1.26a Changelog:1.26a Game Fixes:.

  • unused 8' single sided single density (SSSD) OUT as of Sept 2012, but ask
  • unused 8' single sided double density (SSDD) Use SSSD disks, no difference!OUt as of Sept 2012, but ask
  • unused 8' double sided double density (DSDD), brand names, largely Dysan. $45 per box of ten + ship.
  • unused 8' hard sectored (32 sector): we have a few boxes left! MITS Altair ICOM Wang used these. $59 per box of ten + ship.
  • Disks of specific form or condition may cost more - be specific when ordering.

8-inch diskettes lightly used
NOTE: for used disks below, we'll try to provide them all of one brandper set of ten. Give us a few choices of brand if you have a preference.

  • 8' DSDD, lightly used once to a few times, with sleeves: $25 per ten + ship.
  • 8' SSSD, lightly used once to a few times. with sleeves: $25 per ten + ship.
  • 8' SSDD, lightly used once to a few times. Use SSSD, no difference!
  • Disks of specific form or condition may cost more - be specific when ordering.

lables for 8' disks, $1 per ten

5.25 inch diskettes:

Note: review the general information above before ordering. If you want ONE OR TWO 8-inch or 5.25-inch floppy diskettes, follow this link.

5.25' soft sectored: not for sale by me, but they are hard to find in 2010.
5.25' hard sectored:
-- 16 sectors double sided double density (DSDD), new old stock: contact me
-- 10 sectors: I have no sources but contact me anyway.
-- if you have HARD SECTORED disks to sell, let me know.

3.5 inch diskettes:

3.5' 800K (720K) 3.5' double sided DOUBLE density (not high density). Great for older Mac/Apple equipment, some old computers andPC's. Can also use as 400K (360k) (single sided) diskettes.

Unused old stock, sealed - not available as of 2011 from me.

1.4M 3.5' diskettes - widely available elsewhere.

Diskette cases

CP/M and S-100 floppy disk controllers

If you 'want CP/M to run on my S-100 system', pleaseread my Frequent Questions page and my 'how to run CP/M' Pagefor answers to thatquestion. If you want docs for YOUR S-100 controller, check my lists of card manufacturers tosee if I have the manual for your card. I have a few floppy controllercards for sale but in general I'd rather you ask for a SPECIFIC manufacturerand brand of card rather than 'just any'. However I do have one brandand model available for general interests. Check mySD Systems Versafloppy II page for the status of S-100 Versafloppy IIcontroller cards and software in my stock.

I have docs, with source code, for many S-100 floppy disk controllers. If you are debugging or repairing a floppy disk controller that is NOT S-100, you may find one ofthese manuals useful. they are listed by manufacturer and model; start from myS-100 home page to search the lists of manuals. Also, check my list of S-100 Web pointersfor sites which also have docs for controllers, or FDC chips such as the Western DigitalWD1771, 1773, 1793, and so on. The same considerations apply to older hard disk controllers of course.

Buying floppy drives

Ordering floppy drives

Floppy drive power requirements


Various 8-inch floppyd drive cabinets are available, ask for details. Shippingextra, weight and size is considerable, espeically with power supplies. These are almost always non-switching supplies. Size about 19 inches wide, several inches high,various depths. With the power supply in the back, these can be 24 inches deep. Mostare intended for 'full height' drives.

For purchase, please note your location by city/state/zipwhen inquiring for shipping estimates. Not shipped outside the USA - are you kidding? If you are interested in empty cabinets, PLEASE note what kind of power connector your drives have: there are several varieties. Supply limited, cables also limited.Prices subject to change.

Here's a stack of some 8-inch cabinets
a single 8-inch cabinet
another 8-inch cabinet

A rather sleek drive cabinet was theHeath/Zenith Z-207-41 tabletop 8' drive cabinet. Autocad notes 2015 in hindi pdf. A tan cabinet on rubber feet, with power supply and fan, power switch on front. I have a few of these left, I use them regularly, so I'm not likely to sell one - it's a good example. Shipping weight is 40 lbs for cabinet and power supply, with two drives it typically weighs 55 lbs. A 30-page manual is available, ask for a price for a copy.


floppy and hard Drive Documentation

All documentation photocopied at a per-page fee plus postage and handling. I will quotea price when you order, check my ordering information .Ask for manuals for your specific drive, by manufacturer and model number. Ifyou have a manual I don't, I'd be interested in a trade or purchase ofcopies. If you need a manual for a drive not listed below, contact me soI can get look for it!

Often I get requests for 'just the jumper information'. It turns out the jumper info typically is several pages depending on the manual, not just one. And you may or may not need more info from the manual, either to set the jumpers or to maintain or repair the drive, or in some cases the pinouts of the drive connector. But, assuming the jumper info is six pages or less, I'll charge $2 to pull the manual and copy those pages, plus postage and handling to send those pages in a business letter type envelope at several ounces weight by air mail. (Remind me of this policy if you choose it.)

8-inch floppy drive manuals

Optotronics technology, DCU - disk control unit (AC drive motor control), 12 pgsCalcomp 140 OEM Reference manual, 40 pgs, no schematics or parts
Calcomp 142M Tech manual, 60 pgs, parts, schematic and rework notes
California Computer Products, CalDisk 142M Tech manual, 60 pgs, parts, schematic and rework notes
California Computer Products, CalDisk 143M (2-sided) Tech manual, 50 pgs, parts, no schematics
{Calcomp bought CalDisk so manuals may be identical. The 142 use different
read data decoder boards for FM or MFM format - if you use that option.
Control Data spec sheets, 9406-4 4 pgs, color photos
Control Data brochure, 9406 9404 and 9408 9409. 4 pgs color
Control Data (CDC) (MPI) BR803, BR8A3, BR8A2, BR8A5, BR8A6 models, 76 pgs. Includes adaption to Shugart-like signals.
Dysan 360/2A 8-inch alignment disk instructions, 1978, 8 pages
Dysan Maxi 48 TPI Diagnositc diskette manual, for 808-100, 808-200, 808-300, 808-400; 4 pgs
iCOM - see this Web page
IMI 5007 disk drive, Cromemco HD5 manual #023-6028, January 1982, 104pp.
Innovex 200M Floppy Disk Drive Maintenance manual, Oct 1975. 68 pgs
Magnetic Peripherals Inc (CDC) (MPI) BR803, BR8A3, BR8A2, BR8A5 models, 76 pgs. Includes adaption to Shugart-like signals. 76 pgs
Mitsubishi M2894-63 Standard Specifications, 46 pgs
Mitsubishi M2896-63 manual by Mitsubishi, standard specifications 68 pgs, schematics
..this version has all small IC's oriented PARALLEL to 50-pin edge connector
Mitsubishi M2896-63 manual sold by Heath/Zenith, 60 pages, schematics
..this version has IC's between power and head connectors PERPENDICULAR to 50-pin edge connector
Matsushita JA-751A specification, 36 pgs
NEC FD1165 maintenance manual, copy, 100 pgs
NEC FD-1165 Product Description manual, copy, 44 pgs
PerSci drives: Cromemco
PerSci 299B disk drive technical manual, Cromemco #023-6000, April 1981, 50 pp.
PerSci 277 disk drive allignment procedure, Cromemco #023-6008, March 1980, 15 pp.
PerSci model 277 diskette drive product spec, Cromemco #023-0057, 25 pp.
PerSci 277 disk drive instruction manual (parts list and schematics), Cromemco #023-0016, May 1980, 50 pp.
PerSci drives: IMSAI
Persci model 70, 270, 277, 1070 documents - See my IMSAI Web page
-- model 277 dual Spec sheet, 2 pages, 2-color 1977
-- model 70 Spec sheet, 2 pages, 2-color 1977
-- model 270 dual Spec sheet, 2 pages, 2-color 1977
-- 1070 Intelligent Diskettte Drive Controller (summary), 8 pages text
Pertec FD400 FD410 FD500 FD510 etc.:
..see my MITS/Altair Web page for other Pertec docs
Qume DataTrak 8 (full height) (DT8) Product Specifications, Apr 1979, 13 pgs
Qume DataTrak 8 maintenance manual, Jan 1980, half sized, 80 pgs
Qume DataTrak 8 maintenance manual, Jan 1980, full sized, first 40 pages plus HALF of last 40 pgs
QumeTrak 842 drive - same as Qume DataTrak 8 or DT8 as above
QumeTrak 842 maintenance manual, Dec 1981, 96 pgs (from copy)
Qume 242 (half height) product manual, 27 pages (from copy)
Qume 242 maintenance manual, schematics 92 pgs (from copy)
Remex tech manual, RFD4000-A, RFD4001-A RFD2000-A, RFD2001-A, 1979. over 125 pages
Siemens (Singer, World Disk Drives) FDD100-8 manual, 90 pgs
Siemens (Singer, World Disk Drives) FDD200-8 manuals:
-- Volume 2 Tech Manual, parts and procedures. 36 pages
-- Volume 1 Tech manual, operation, theory, installation, 94 pages
-- no schematics, different from FDD-220 circuit board
Shugart SA800, SA801 manuals below from 1977: 25100-25017 models (small IC chips)
Shugart SA800 Double Density Design Guide - App. Bulletin, 1977. 33 pgs.
Shugart SA800 SA801 OEM manual, 42 pgs (jumper and use information)
Shugart SA800 SA801 maintenance manual, 30 pgs (schematics, testing advice)
Shugart SA800 SA801 illustrated parts catalog, 16 pgs (parts diagrams& lists)
Shugart SA800 SA801 Theory of Operation,31 pgs (parts diagrams& lists)
Shugart Spare parts price list, see below
Shugart SA800, SA801 manuals below for PC board #25136 (all small IC chips) and 25229 (w/ large LSI chip)
--- also numbers 2510X, 2517X, 25229

Shugart SA800 SA801 Service manual, 1981.Theory, maintenance, 100 pgs
Shugart Spare parts price list, see below
Other Shugart manuals:
Shugart SA850, SA851 service and maint. manual, copy, 100 pgs
Shugart application note, 'replacing an SA850/851 with an 860', 8 pgs
Shugart Spare parts price list, 1980 and 1981. For SA 800, 801, 810, 850, 860? drives. 30 pgs.
Shugart SA810, SA860 OEM manual, 54 pgs
Shugart SA810, SA860 OEM and service manual, 112 pgs
Shugart SA809 drive exercisor manual, from copy, 8 pgsMitsubishi Mf355f 592ma Manual Inject Floppy
Shugart SA900, 901, 902 maintenance manual. schematics. 74 pgs
Shugart SA900, SA901 OEM manual, 38 pgs
Synetic FDS-2 - see this Web page
Tandon TM848-1, TM848-2 Product Specification, 16 pgs
Tandon TM848(-1,-2) 8' drive technical manual, Rev B, C, D, Dec 1982, circuit board 210060 or 210094, 96 pp.
- above same as Cromemco #023-6040 service manual
Tandon TM848-1E, -2E OEM, oper., service manual, 1983, circuit board 210742-000 or 210772 or 210771, 93 pgs
Wangco 82 floppy drive oper. & maint.manaual, Cromemco #023-0058, 1981, 50 pp.
Y-E Data YD-174 Two-Sided Diskette Drive, schematics, 10 pgs
Y-E Data YD-180 8-inch drive manual, from copy, 30 pgs

5.25 inch floppy drive manuals

Canon photos of MDD200, MDD400 series, 2 pgs each
Canon MDD-210, -220 tech guide, 40 pgs
Canon MDD-210, -220 product brief, 16 pgs
Control Data spec sheets, 9415 2 pgs, 9415-80 2 pgs, 9406-5 4 pgs,
Control Data brochure, 9406 9404 and 9408 9409. 4 pgs color
Control Data (CDC, MPI) 9429 Hardware Maintenance manual, 64 pgs
Control Data (CDC, MPI) product specification for 9429, 77715860, 46 pgs
Control Data (CDC, MPI), Application note, 'PLO and Write Precompensation for 5.25 inch FDD's', 77653447, 40 pgs
Control Data, Application note, '5.25 inch FDD Format considerations and controller compatibilities', 7589469, 45 pgs
Dysan 282 alignment disk instructions, 6 pgs
Dysan Mini 48 TPI Diagnositc diskette manual, for 508-100, 508-200, 508-300, 508-400; 4 pgs
Dysan Mini 96 TPI Diagnositc diskette manual, for 506-100, 506-200, 506-300, 506-400; 4 pgs
Epson SD0540 series specification, schematics, 34 pgs (copy)
Magnetic Peripherals Inc (CDC) 9429 Hardware Maint. Manual, 64 pgs
Magnetic Peripherals Inc (CDC) product specification for 9429, 77715860, 46 pgs
MPI (Micro Peripherals Inc) Model 51/52 product manual rev 3
MPI (Micro Peripherals Inc) Model 51/52 product manual addendum to above
MPI (Micro Peripherals INc) MOdel 91/92, schematic only
Micropolis 5.25-inch drives: see this documentfor more info and manuals.

Mitsubishi MF501A-3 tech manual, half height drive, 23 pgs
Mitsubishi MF501A-3 maintenance manual, half height drive, 11 pgs
Mitsubishi MF501A-301U illust. parts list, half height drive, 9 pgs
Mitsubishi MF501A-347UA manuals in Tandy 3000 Tech manual
Mitsubishi M4851 OEM manual, half height drive, 65 pgs
Mitsubishi M4851 manuals in Tandy 3000 Tech manual
Mitsubishi M4853 maint. manual, 35 pgs
Mitsubishi M4853 parts list, schematics, 28 pgs
Mitsubishi M4853-1 maint. manual, 18 pgs
Mitsubishi M4853 parts list, schematics, 22 pgs
Mitsubishi M4853 and M4853-1 differences, 8 pgs
Mitsubishi M4854-347 manual, half size (Tandy 3000) as follows:
----jumpers and schematics, UGD-0262A, 9 pgs;
----standard specifications , UGD-0261A, 50 pgs;
----parts list, 14 pgsMitsubishi MF504A-347UA manual, half size (Tandy 3000) as follows:
----jumpers and schematics, & component layout, UGD-0328A, 20 pgs;
----maintenance , UGD-0343A, 10 pgs;
----technical , UGD-0344A, 24 pgs;
----standard specifications , UGD-0312B, 46 pgs
----illustrated parts list, UED-0135A, 10 pgs
Mitsumi D509V2 service manual, 70 pgs (copy), schematic
Newtronics Co. Ltd - see Mitsumi
Pertec FD250 Operating and service manual, 36 pgs
..see my MITS/Altair Web page for other Pertec docs
Qume 142 maintenance manual, May 1983, full sized, 100 pgs
Shugart SA455, SA465 service manual, 69 pgs
Shugart SA410, SA460 manual (copy), 100 pgs
Shugart SA455/465 OEM manual, copy. specs, jumpers, only. 25 pgs
Shugart SA400 OEM manual, 50 pgs
Shugart SA400 Service manual, schematics, 77 pgs
Shugart SA400L Service manual, less schematics, 30 pgs
Shugart SA809 drive exercisor manual, from copy, 8 pgs
Siemens FDD-100-5B OEM, has schematic and maintenance, 76 pgs
Teac FD-54B specifications, 30 pgs
Teac FD-54 maintenance manual, 72 pgs
Teac FD-55GFV-17 specification, 44 pgs half sized (copy)
Teac FD-55GFR specifications, jumper and mechanical info, no schematics. 21 pages (copy)
Tandon (TM100) 5-1/4' floppy drive manual (Vector computers) 104 pgs
--- TM100-3, TM100-4 TM100-3M, TM100-4M w/schematics & parts, troubleshooting, more.
--- (see Vector Graphics manuals for more info
Tandon TM100 Tech, 100 pgs - ????
Tandon TM100-1, TM100-2 Product Spec & Users manual, 26 pgs, no schematics (copy)
Tandon TM101-4, TM102-2 Product Spec & Users manual, 27 pgs, no schematics (copy)
Tandon TM50-1 TM50-2 Operating and Service Manual, 100 pgs (copy)
-- detailed theory, signals, jumpers, maintenance, schematics.
Tandon TM100 Operating and Service Manual, 24 pgs half sized no schematics (copy)
-- alignment, signal, connector and jumper info.
tandon TM100-2 Product Specification, signals & jumpers but no schematics 16 pgs (copy)
tandon Product Specification, TM-100-1, -2, -3, -3M, -4, -4M. no schematics 15 pgs (copy)

3.0 inch and 3.5 inch floppy drive manuals

Canon photos of MD350, MDD200, MDD400 series, 2 pgs each
Canon MD350S specification, 30 pgs
Epson SMD-280 spec sheet, 2 pgs
Matsushita EME-160 & -180, 15 pgs
Mitsubishi MF355B standard specification, 46 pgs
Mitsumi D359T2 service manual, 64 pgs (copy), schematic
Panasonic EME-150M tech spec (3.0'), 14 pgs
Panasonic EME-150 & -250 OEM manual (3.0'), 20 pgs
Panasonic JU-313, 323, 363 OEM manual, 38 pgs
Sony MP-F73W-00D & -01D tech note, 26 pgs
Sony MPF73W00D, -01D product spec, 26 pgs
Sony MP-F73W-50 info (buy with MP-F73W-00 docs no extra charge)
Sony MPF920, MPF820 - various data sheets, 6 pages

Some people ask: 'I want to read 8-inch diskettes on my PC/Windows/Linux machine. Please sell me a complete system, or tell me where to get one.' Often they have no idea how this might be accomplished. Other people want to read CP/M oer other non-MS-DOS 5.25' or 3.5' diskettes, or old Mac 400K or 800K 3.5' Mac diskettes, on a Windows PC. Folks, this is not a 'plug and play' project. A few people want to read really ODD formats - hard sectored, M2FM, and so on. Until Sept 2011 I had information on this subject, on this Web page. How to read and write 'old' floppy diskettes now has it's own Web page, look there for details. Links below to the old discussion, now link to the new Web page. - Herb Johnson

floppy drive controllers with conversion, imaging software - Discussion of various PC based floppy controllers is moved, look there for details.

A reference to Sydex, ANADISK and 22DISK is also moved to the Web page on How to read and write 'old' floppy diskettes

Catweasel floppy controller - The Catweasle discussion is moved look there for details.

Software to support foreign diskettes on Windows-based PC's - is moved to another WEb page, look there for details.

Check my 'how to CP/M' Web page for more discussion of Dave Dunfield's imagedisk software tools, and his collection of system disk images.


Copyright © 2018 Herb Johnson